You are here: Main
ThermoView TV30
Thermal Imager
Monitor temperatures in severe environments without the need for vulnerable computer equipment
No additional software required
- TV30-SA: An accessible, standalone thermal imaging solution with onboard analytics and remote setup via web browser
- TV30-GE with ThermoView Software for enhanced inspection capabilities: Ideal for complex tasks
Designed for the toughest conditions
- Rugged and reliable IP67 housing is resilient and built to last
- With an air purge, water-cooling jacket, and other accessories available, you can be sure your equipment will stand up to whatever is thrown at it
Avoid costly downtime
- The TV30 identifies defects and can alert you when any anomalies are detected
- Continuous 24/7 monitoring
Key Features
- Multiple fieldbus protocols for simple integration
Integrating a system is never easy. Without the right tools, it can cost you time, money and frustration. Our fieldbus protocols are designed to make integration with most PLCs simple and cost-effective. OPC UA, and MQTT are all supported by our gateways, so you can avoid needing hardware I/O devices.
- Accessories to satisfy the most difficult installations
Air purge, water cooling, and outdoor enclosures provide added security in the most demanding applications.
Software
The intuitive ThermoView software enables you to take control of multiple parts of your process like never before with advanced analytical tools, auto-alarming features, and more. Several key features include:
- User-configurable and quick setup options that makes installation fast and easy without unnecessary downtime
- Establish alarms or signals that interface to discrete I/O to better control your process
- Customizable Areas of Interest with advanced pass/fail logic – allowing you to perform product inspections, monitor process temperature and more all at once
- Independent, continuous, intermittent, and/or remote evaluation of temperature conditions so you can read temperature data whenever or wherever you need it
ThermoView TV30 Thermal Imager Datasheet
ThermoView TV30 Thermal Imager Brochure
Fluke iSee - TC01A/TC01B
Mobile Thermal Camera
With the Fluke iSee™ Mobile Thermal Camera, the temperature can be measured and thermal imaging detection can be carried out anytime and anywhere through the Type C interface of a smartphone. It can facilitate quick checking during electrical and mechanical inspections, residential and commercial uses, household HVAC inspections, field observation, and education purposes, which uncovers the invisible world of temperature.
- Detailed image quality comparable to professional thermal cameras
- Powerful full temperature range analysis
- Real-time image sharing for fast and easy communication
- Small and portable, takes only a second to get started
Fluke 179
True-RMS Digital Multimeter
The Fluke 179 True-rms Digital Multimeter is the industry-standard troubleshooting tool for electrical and electronic systems. This incredibly versatile multimeter makes a perfect front-line troubleshooting tool with an input protection rating of CAT III 1000 V, CAT IV 600 V. The built-in temperature measurement with the included thermocouple, analog bar graph and backlit digital display make it easier to take the measurements you need.
A full set of basic and advanced troubleshooting capabilities including:
- Manual and automatic ranging
- Display Hold and Auto Hold
- Min/Max-Average recording
- Voltage measurements to 1000 V AC or DC
- Current measurements to 10 A AC/DC
- Resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃
Key features
- 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 MΩ; capacitance to 10,000 μF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃
- Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording
- Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.
Fluke 719Pro
Electric Pressure Calibrator
Fluke 719Pro Electric Pressure Calibrator sources, simulates, and measures mA signals and more
The 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more making it the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges.
Get the ultimate in measurement flexibility with the large backlit screen, which displays three parameters at once:
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
- Temperature measured by optional RTD probe
Key features
- Unique integrated electric pump for one handed pressure calibration
- Test pressure switches easily with easy-to-use switch test function
- Precision pressure adjust vernier for easy and accurate pressure calibration
- Ideal accuracy and performance (0.025%) for reference class transmitter calibration
- 30 psi, 150 psi and 300 psi pressure ranges
- Programmable pressure calibrator pump limit:
- Eliminates over-pressurization
- Allows the user to program target pressures for pumping
- Extended pressure measurement range with any of 29 750P Pressure Modules
- Pump cleanout ports reduce pump failures from moisture and fluid damage
- Fluid trap included with the unit to mitigate chance of fluid damage in at-risk applications
- Precision temperature measurement with optional RTD probe
DCM300E
Earth Leakage Clampmeter
- 0.01 mA resolution
- EMC and IEC61010-2-032 compliance
- 30 mA, 300 mA, 30 A and 300 A range
The DCM300E Earth Leakage Clamp designed primarily to check earth leakage currents with a dedicated 30 mA range providing resolution down to 10 µA. The capabilities of the DCM300E extend to measuring currents of up to 300 A ac, making it a highly versatile instrument capable of taking current measurements in a wide variety of situations and applications.
A typical application for the DCM300E would be the measurement of earth leakage current in a circuit where the RCD or GFCI repeatedly trips out. The measured result will quickly identify whether an excessive leakage current is causing the RCD or GFCI to trip, or if the RCD or GFCI itself is faulty. The DCM300E has 4 ranges: 30 mA, 300 mA, 30 A and 300 A with a best resolution of 0.01 mA. The analog-style bargraph of the DCM300E is very useful when monitoring changes, allowing the operator to easily interpret the rapidly changing bargraph rather than the digital display. Other key functions include the “Data Hold” feature which aids in measurements where there is a problem with accessibility or poor lighting, and the automatic power off feature that extends the battery life.
This clampmeter was also designed with safety in mind and exceeds the latest safety design standards IEC1010-2-32 and EMC requirements. Extra safety features have been designed into the DCM300E to provide a safer working environment for the user.
Fluke 718
Pressure Calibrator
The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges, and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy-to-clean pump helps protect it from damage and provides the ability to service the pump without disassembly, even in the field.
With an easy-to-use error % calculation you can make pass/fail decisions quickly. Meaning you can make decisions in the field without having to analyze the results later. The min/max/hold function also makes it easy to capture changing measurements for comparison or documentation. The integrated pressure switch test function, and best-in-class mA accuracy (0.015%) provide a high level of measurement confidence and even broader workload coverage.
Key features
- Pressure Source and mA Measurement to calibrate pressure devices
- Built-in pump for sourcing pressure to 300 PSI
- Easy-to-clean, field-serviceable, integrated pressure pump
- Built-in switch test for calibrating pressure switches
- Extend pressure capabilities by using Fluke 750P pressure modules
Fluke Ti480U / Ti401U / Ti300U
Thermal Imagers
The NEW Fluke Ultra Series Thermal Cameras is designed to provide advanced visual infrared experience. It comes with a smart intuitive user interface, increased thermal sensitivity to capture the smallest differences and the latest technology for on-screen clarity. A professional 640 x 480 Infrared Camera with improved spatial resolution and UltraFocus focusing technology makes the Ti480U/401U/300U go-to camera range for the professional moving to the next level.
Key features
- It is equipped with a robust sensor and optical system that delivers enhanced image sharpness to capture a clear image for better quality image presentation
- UltraFocus focusing technology: effective focus algorithm in one second, laser distance autofocus, and continuous auto focus function makes inspection work easier and more efficient
- Up to 30Hz frame rate to support smooth video recording for moving objects
- Temperature measurement range up to 1200 °C to cover higher process requirements and R&D applications
- Support up to 10x digital zoom for easy screen zooming and checking of long-distance targets such as high voltage equipment, overhead pipelines, and large mechanical equipment
- SmartView IR software for PC to process thermal images and videos, analyze measurement data, and generate reports
- Classic Fluke industrial design: Ergonomic and rugged design for single-hand operation in industrial environment
Page 19 of 36
 |
 |
 |
 |
 |
 |
2025 Electrical Testing Expert Catalog
Megger Transformer Catalogue
Megger Cable Catalogue
Industrial Maintenance Catalog 2024
Megger Power Catalog
Merytronic
Portable Devices
Fluke 2025 - 2026 Product Guide
Solucao Product Catalog
Orion Electrical Safety Rubber Equipments Catalogs
BETE Electrical Construction Tools 2025
MULTI Main Sales Product Line 2026
ANHU Electric Catalog
