You are here: Main
Megger IMT100
Industrial Multi Tester
IMT100 is a versatile hand held multi testing instrument with dedicated four wire insulation resistance, and four wire Kelvin low resistance features ideal for comprehensive industrial applications.
This unique instrument in the market, comes with more than 13 testing features and the reliability of Megger’s testers, bringing greater testing possibilities to the photovoltaic and electric vehicle industries allowing effective Continuity, Bonding and Insulation Resistance testing with one only instrument.
Key Features:
- DC voltage and polarity test
- AC voltage, phase rotation and frequency
- Insulation resistance and surface leakage current detection
- 4 wire low resistance bonding test
- 2 wire continuity & diode test
- Data storage
- CAT III 600 V up to 3000 m
- IP54 protection
- Rechargeable batteries
Ariadna CI-DE
Identification of De-energised cable
The cable identifier Ariadna CI-DE device allows to identify of any type of de-energized cable, in a RELIABLE, SIMPLE, and SAFE way.
Specially designed for maintenance tasks involving the handling of electrical cables, it is an effective tool that allows operators to easily and without error identify de-energized cables from other conductors in trenches, manholes, panels…
It doesn’t require calibration before using it, factory calibrated.
- De-energised cable identifier
- Single-phase and three-phase cables
- Signal injection by Direct connection or Induction clamp
- Cable length > 50 km (direct connection)
- Induction signal amplitude and polarity detection
- Identification sound alert
- Operation time > 24 h (level 2)
- Rechargeable battery on the transmitter (CI-DE Tx)
Fluke 985 Particle Counter
Take a new look at indoor air quality.
The Fluke 985 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining airborne particle concentrations. Use the Fluke 985 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.
With the Fluke 985 you can:
- Measure filter efficiency
- Monitor industrial cleanrooms
- Pre-screen indoor air quality and confidently work with IAQ specialists
- Locate particle sources for remediation
- Report the effectiveness of repairs to customers
- Drive additional business by demonstrating the need for maintenance and repair
With a large screen, intuitive icons for navigation and on-screen data presentation, the Fluke 985 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 985 is lightweight and easy to use in any position and with easy data export options using USB cable, memory stick it’s easy to review and analyze the data anywhere and anytime.
HV Tester 25 kV and 25 kV Digital
Portable High Voltage Generator
- DC and insulation testing of cables, joints, electrical fixtures, etc.
- High flexibility, thanks to built-in battery
- Internal discharge facility
- Available with analogue or digital metering
- Built-in timer (1 to 30 min)
The HV Tester 25 kV and 25 kV Digital are portable high voltage generators with a variable negative DC output voltage of 0 to 25 kV. They are robust, lightweight, compact and and easy to use. Due to their small size and internal battery, these test systems are ideal for test conditions where no external power supply is available. Capacitive loads, such as shielded cables, are safely and automatically discharged in the case of a breakdown and at the end of testing via the internal discharge facility. Standard HV tester 25 kV comes with analogue meters, additionally Megger offers the HV tester 25 kV with digital metering which allows a more precise reading of the current and setting of the voltage.
These instruments are ideal for testing paper-insulated/mass-impregnated cables according to IEEE 400-2012 and IEC 60060-3, testing electrical equipment according to IEEE 62.1 and IEEE 95, and testing cable sheaths/outer jackets according to IEC 60502/IEC 60229.
AVO215
CAT III TRMS multimeter
- True RMS CAT III multimeter
- AC/DC voltages up to 600 V
- ACA/DCA up to 10 A
- Resistance 0 to 40 MΩ
- Frequency 10 Hz to 10 kHz
- Capacitance 0 to 4000 µF
- Duty Cycle, Diode, Continuity
- Function data Hold, MAX/MIN
- Built in flashlight
The AVO215 true RMS multimeter is a rugged compact instrument for demanding environments. It measures true RMS voltage up to 600 V and current to 10 A with 4000 count resolution. As well as resistance, continuity, frequency, and capacitance for quick verifications, it meets CAT III 600 V AC/DC safety and contains a built-in flashlight, making it ideal for wide range of applications.
The AVO215 comes with a range of useful features, such as the continuity function, which provides audio and visual results through the use of a buzzer, and the diode function, which allows forward reverse bias testing of diode and semiconductor junctions. Additionally, the unit has an auto range or manual range selection, enabling you to do the job with precision and speed, and it's MIN/MAX and hold functions allow you to read the results easily in daily use.
SMFT-1000
Solar Tools Kit
Fluke Multifunction PV Tester and Performance Analyzer, I-V Curve Trace
Key features
- All-in-one PV system test solution meeting IEC 62446-1 standards for Category 1 and Category 2 tests
- Open-circuit voltage (VOC) measurement at the PV module/string up to 1000 V DC
- Short-circuit (ISC) current measurement at the PV module/string up to 20 A DC
- On-location I-V curve results compares manufacturer I-V curve data to measured data on the analyzer screen
- Compatible with Fluke TruTest™ data management software
All-in-one test solution to verify PV system performance and safety, expedite client reporting.
Test that PV systems are performing to their optimal power output as well as operating safely with the Fluke SMFT-1000 multifunction tester with I-V curve tracing. Designed for PV professionals that provide installation, commissioning and maintenance services to systems that operate at 1000 V DC or under, the SMFT-1000 provides a complete PV testing solution that conforms to IEC 62446-1 standards. Through Fluke’s TruTest™ Software, measurement data from solar site installation and commissioning testing can be easily imported, organized and analyzed for effortless reporting without having to bring a laptop on-site.
Fluke 726
Precision Multifunction Calibrators
Key features
- Precision multifunction, temp, frequency, voltage, and mA calibrator
- Calibrates thermocouples and RTD temperature instruments
- Stores up to eight calibration results in memory for analysis
- Built-in 24 V Loop Power Supply
Process calibration designed specifically for process industries
The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.
Designed for ease of use
The 726 has built-in features that make it easier to use in nearly any measurement situation. From its ability to store frequently used test setups, to programming custom RTD probe calibration constants for enhanced temperature measurement, or the integrated voltage input protection design that improves reliability, the 726 is built to perform. The use of two separate channels even allows you to measure, source, or view process signals simultaneously. The backlit display provides better visibility in low-light conditions, and the standard 3-year warranty provides extra confidence that the 726 will be there when you need it to be.
Page 20 of 36
 |
 |
 |
 |
 |
 |
2025 Electrical Testing Expert Catalog
Megger Transformer Catalogue
Megger Cable Catalogue
Industrial Maintenance Catalog 2024
Megger Power Catalog
Merytronic
Portable Devices
Fluke 2025 - 2026 Product Guide
Solucao Product Catalog
Orion Electrical Safety Rubber Equipments Catalogs
BETE Electrical Construction Tools 2025
MULTI Main Sales Product Line 2026
ANHU Electric Catalog
